Installing The Underfloor Heating System
As all the elements have been pre-wired and
custom made to fit your floor area,installation
is simply a case of opening the elements out
over the Depron thermal panels, and then
fitting your flooring.
Start with a clean, dry & level sub-floor
Cover the floor with a PVC moisture barrier
Lay the Depron© thermal panels brick fashion
Leave a 10mm gap at the edges to set the wire into
Open out the thermatec panels (they simply pull out like a concertina) to fit the area
Push the connecting wires into the gap at the edges of the Depron. Cut slits out of the Depron to ensure a flush fit.
Cover the elements with a further sheet of protective PVC and commence laying the wood/laminate flooring
Finish laying the floor. The wiring is now ready for connection to the supply.
The final connection to the supply should always be made by a qualified electrician.