Engineered Hardwood Flooring - Dubove Oak Herringbone Parquet Flooring
£58.55 m² + V.A.T.
Our Dubove Parkett can be laid in a herringbone design as an engineered floor over underlay. The 6mm solid European oak wear layer is designed to give a lifetime of wear- even in a commercial environment.
The classic beauty of a herringbone floor reflects the very best of flooring techniques. Herringbone flooring, is a method of laying wood blocks in a traditional wood parquet (parkett) pattern. The blocks are hand crafted to exacting standards providing as nearly as possible, tightly interlocking joints on all edges. Each block is locked to the surrounding blocks to give maximum strength, stability and integrity to the floor.
Traditionally, herringbone designs are made by bonding un-finished oak blocks to a painstakingly levelled and prepared sub-floor using a wood block flooring adhesive . The wood block must then be sanded smooth before being lacquered oiled or waxed. Typical skilled labour costs for this method can be around £80-£100 square metre increasing to around double this figure for smaller awkward shaped areas e.g. hallways.
The unique 'Dubové Parkett can be quickly and easily installed over conventional wood floor underlay at a fraction of the laying costs of solid flooring. Also once installed, being pre-finished, it is ready to walk on and use without further work. Once fitted it is indistinguishable from a solid wood block floor in both look, feel and sound when walked upon. Dubové Parkett flooring hardwood blocks are machined to provide a thick wear layer (approximately 6.2mm) above the tongue and groove, this enables the Block Floor to be resanded many times if required, enabling the floor to last as long as the building!
Dubové Herringbone floor is Available in 'Vintage Oak' which is wire brushed to raise the grain. It is smoked in a kiln and then finished with a floor oil. The result is an aged textured richly coloured floor showing knots, shakes and grain variations. It is a wood floor that improves with the knocks and scrapes of everyday life.
Also available in Prime Grade Oak which is a classic straighter grained floor, with minimal knots and grain variation.This has a smooth even finish in either natural or white oil.
The dimension of the Dubové blocks mean the length is a multiple of the width. This ensures that floor can also be laid in a traditional Stab Parkett, Basket Weave or 'Dutch' pattern
- With Dubové Parquet a herringbone floor design can be easily achieved at low cost over any type of sub-floor. Once installed the floor is ready to walk on as it is pre-finished, saving the time and expense of sanding and sealing.
- Board size of 155mm (width) x 20mm (thickness) x 465 (length) and sold in a 1 Sq Mtr pack. (contains 50% Left & 50% Right hand tongues)
- Optional 155mm x 155mm square blocks can be used to create a Dutch parkett design floor.
- Precision engineered tongue and groove system ensures an easy and speedy installation. The herringbone blocks are simply bonded together with a PVA adhesive. The eased edges mean you are guaranteed a smooth blemish free floor surface.
- The oil finish has been applied in three stages and polished to ensure long life and minimal maintenance. Scufs, scratches or indents are easily removed by rubbing in maintenance oil with a scotchbrite pad.
- The substantial 20mm thickness means that a 'solid' wood floor feel and sound are assured. The 6mm solid oak wear layer will withstand a tremendous amount of wear, and can be re-finished many many times to ensure a long life.
Looking for a solid oak herringbone floor? Look at our Solid oak herringbone flooring
This product is in Stock!
Click here to check individual stock levels for this product
Further Information:
